Home › Erosion Control Blankets and Matting (Commercial)
We install commercial erosion control blankets in Austin, TX on slopes, channels, and around stormwater structures. Combined with hydroseeding, these blankets reinforce vegetation and protect soil until roots are established. Our crews are experienced in working to plans and details on large civil and commercial projects.
Legendary Hydroseeding Austin provides professional commercial erosion control blankets throughout Austin, TX, Texas and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 737-237-0380 or request your free quote.
Commercial erosion control blankets that work in Central Texas conditions
Austin slopes do not behave like flat lots in other parts of the country. We get short, intense storms, long dry spells, thin rocky soils, and heavy construction traffic. Commercial erosion control blankets have to be chosen and installed with those realities in mind or you end up with washed out seed, exposed subgrade, and busted inspection reports.
Legendary Hydroseeding Austin focuses on commercial erosion control blankets and matting for sites across the Austin area, from I‑35 corridor projects and business parks to municipal work and subdivision infrastructure. We match blanket type, anchoring pattern, and installation sequence to your grading plan, stormwater requirements, and construction schedule. Our goal is simple: keep soil and seed where you put it and keep inspectors, neighbors, and downstream property owners off your back.
We handle both temporary blankets for establishing vegetation and long term or permanent turf reinforcement matting for high flow or steep conditions. Our crews are used to working in active construction zones with other trades present, so we plan access, staging, and phasing so blankets go in when they will actually be protected and effective, not torn up the first time a skid steer crosses the slope.
Materials and options for commercial erosion control blankets and matting
On commercial jobs, one type of blanket does not fit every area of the site. At Legendary Hydroseeding Austin we typically use a mix of products matched to slope steepness, soil type, and expected water flow.
For temporary erosion control on mild to moderate slopes, we often install straw or straw coconut (SC150 type) blankets. These work well on Austin limestone cuts and fill slopes where you need 12 to 24 months of protection while grass gets established. On steeper slopes, higher wind exposures, or where the soils are very sandy or caliche based, we lean toward heavier coconut blankets or double net products that resist uplift and undercutting.
In channels, around outfalls, and at the toe of slopes, we may move into turf reinforcement mats (TRMs). These synthetic or composite mats are designed to stay in place after vegetation is established and to handle concentrated flows that would tear out a normal blanket. We use products rated to specific shear stresses, which we match to your engineer’s drainage calculations and city of Austin criteria.
Where rock is shallow or exposed, we combine blankets or matting with spot rock pinning, soil infill, or selective topsoil import so the blanket actually contacts soil and roots can penetrate. We also coordinate seed mixes with our hydroseeding work so the blanket and seeding method are compatible. For example, some dense TRMs need a specific seeding approach so the seed does not get trapped on the surface where birds can eat it.
How we install commercial erosion control blankets on Austin projects
Correct installation is what makes commercial erosion control blankets worth the money. Our process at Legendary Hydroseeding Austin follows a field tested sequence that we adjust to each job.
First, we walk the slopes with your superintendent or site manager. We verify final grade, check for rills, gullies, and compaction issues, and confirm where trucks and equipment still need access. There is no sense in blanketing a haul road that will be used all week. We flag blanket limits so operators do not accidentally disturb them later.
Second, we prepare the surface. That means smoothing out ruts, knocking down clods, removing large rocks and trash, and scarifying hardpan just enough so roots can grab. If topsoil is specified, we check depth and uniformity. A blanket over polished clay or dusty rock will slide and fail with the first inch of rain.
Third, we install blankets with proper anchor trenches. At the top of the slope or channel, we cut a small trench, usually 6 to 12 inches deep depending on the product, tuck the blanket, staple, then backfill and compact. On long slopes, we add mid slope check slots to break up runoff energy. Edges are overlapped according to manufacturer specs, typically 3 to 6 inches on sides and 6 to 12 inches in the flow direction.
Fourth, we staple or stake using density patterns that match wind exposure, slope, and soil hardness. In many Austin projects, shallow rock means some staples will hit stone, so our crews carry multiple lengths and use heavier duty pins across critical lines like tops and toes of slopes and along flow paths.
Finally, we coordinate seeding. Depending on the blanket type and project specs, we either seed and fertilize before blanket placement or hydroseed over the top with rates adjusted so seed reaches the soil. After installation, we take photos for your records and for inspectors, then outline any access restrictions to protect the slopes until vegetation has established.
Costs, scheduling, and what affects your price in Austin
Commercial erosion control blanket pricing is more involved than a simple per square foot number. Legendary Hydroseeding Austin builds estimates around several local factors so you understand where the money goes and how to control it.
Slope geometry is the first driver. Long, steep or convoluted slopes with benches, walls, or utility conflicts take more time and more anchors than broad, gentle ones. Rock conditions matter too. If we expect a lot of refusal when driving staples, we may need heavier pins or predrilling in specific areas, which affects labor.
Access and staging are another big factor. If we can back a truck near the work and unroll blankets downhill, your price will be lower than if material has to be carried or shuttled with equipment around a tight site. Working around ongoing trades, like retaining wall crews or utility contractors, can also slow production and may require return trips.
Product choice influences cost as well. Straw blankets are the least expensive, coconut and straw coconut are mid range, and permanent turf reinforcement mats and composite systems typically cost more but may be required by plans or city of Austin stormwater criteria. We always match or substitute products only within the engineer’s specifications or after written approval.
Scheduling in our climate is critical. We look at forecasted heavy rain events and set installs just ahead of likely storms but not so early that construction traffic will destroy the blankets. On fast tracked commercial projects, we often phase work so critical slopes, channels, and perimeter controls are completed first to help you pass inspections and reduce offsite sediment tracking.
Common failures in erosion blankets and how we prevent them
In and around Austin we see the same erosion blanket failures on commercial sites over and over. Legendary Hydroseeding Austin designs its approach specifically to avoid these problems.
One common issue is blankets installed over unfinished grading. If ruts, depressions, or loose fill are left under the blanket, water will channel underneath and create blowouts during the first storm. Our crew refuses to blanket obviously incomplete areas and will flag those spots for your grading operator before we start.
Another frequent failure is lack of proper termination. Without a well compacted anchor trench at the top of slopes and at inlets and outlets, water sneaks under the blanket and peels it back like carpet. We cut and compact terminations even when the plans are vague, following manufacturer guidance and local experience from past storms.
We also see many projects where blankets were installed then immediately driven over by equipment. Tire tracks create low spots that concentrate flow, tear nets, and slice fibers. On active sites, we help your team set up simple markers or temporary fencing to keep traffic off new blankets and we schedule our work in windows when subs can stay out of those areas.
Finally, seed and soil contact is often overlooked. If seed is not in contact with soil under the blanket, you may get almost no germination. We adjust seeding methods for each blanket or matting type so seed ends up where it needs to be. After big storm events, we can also reinspect and patch damaged sections quickly so a small washout does not turn into a full slope failure.
